Foilcraft Jnr Pencil Printing Kit 2 - Hot Foil Stamping Machine

NOTE! Printing onto pencils represents a learning curve due to the fact that the letters are small (10pt), small print area on pencil, printing onto wood and aligining products correctly due to a small surface area. Pencils can also vary in quality and you must allow a certain percent as rejects and they must be built into your costings.

Practice on cheap pencils first (available from pound shops) as each pencils gives you 12 attempts (6 on each end of pencil)

Whilst pencils can be printed with the cheaper metal letters contained in the package, we would recomend upgrading to more sharper and durable brass letters, shown as options just below the contents of this kit.

To get a good quality print, you must apply consistent downward pressure. The machine height must be adjusted correctly so that your letters are making a perfect contact when being pressed into the pencil. PRACTICE - PRACTICE - PRACTICE!

 

Price Guide (RRP):

GBP: £1252.31+VAT
USD: $1495.00
AUD: $2265.00
EUR: €1410.00

These are guide prices only and exclude shipping charges which can be advised on request.

Foilcraft Junior is our smallest hot foil stamping machine with a maximum print area of 4"x1.25".   Within this print area, it is possible to print upto 3 lines of type or a die as large as 4"x1.25".

Therefore, if you are looking to personalise leather products, then this machine is adequate for most tasks. For a larger printer area, please look at our FoilCraft 4x3

 

10pt Brass type and accessories are supplied with this machine - ready for personalising pencils. For other type options and sizes, please click here.

Printing onto pencils is easy but it also depends on the quality of pencils and how smooth they are. Although you can print pencils with metal type, in the longer run, we would recommend using brass type for greater longevity and extra sharpness. Here is a video where our customer is printing on to pencils using optional brass letters with the Foilcraft Junior https://youtu.be/YqMV64tKubo

All our machines are available in either 110v or 220v, so can be used Worldwide. 

Machine Features:

Maximum Print Area: 4" width x 1.25" height
(approximately 100mm width x 32mm height)

Print Reach: The heat platen extends the chase to approx 5.5" from the rear of the machine leaving plenty of space to position your item.

Small Footspace:
27cm x 40.5cm x 25.5cm Machine Weight (unboxed): 12kg
Allows you to fit the machine on most desktops or workstands and fully portable.

Height adjustable:
Load products up to 2" Thickness (approx. 5cm).

Print Bed Size: 14" x 10" (Approx 35cm x 25cm)
With open access from the front and sides of the machine, this allows easy positioning of your products.

Temperature Contoller:
300W Analogue controller with thermostat regulator.

All our machines are CE approved and available in either 110v or 220v, so can be used Worldwide.

Proudly Designed in Great Britain.

A Starter kit for those wishing to add personalised print onto hexagonal pencils. 

1) FoilCraft Junior Manual hot foil printing machine with built-in Type Holding Chase (British Design)

2) 4”x1.25” Die holding block with handle

3) Die bonding tape (25mm x 1 metre in length)

4) Spacing furniture

5) Piece of Presspahn backing substrate (15cm x 13cm)

6) Piece of Rubber Cloth backing substrate (15cm x 10.5cm)

7) Pair of 1.5mm thick magnetic guides

8) Pair of 6mm thick magnetic guides

9) 1 x 3” Wide rolls of foil x 400 feet in length (Metallic Black) £9.25+VAT. 
Metallic Gold supplied free with machine.

10) Pen/Pencil Jig £65.00+VAT

11) 100 Piece Brass Typeset - 10pt Helvetica Light  Upper Case Font  - £248.06+VAT

12) Pack of 10pt Brass Quads & Spacers £40.00+VAT

13) 1 x 10pt. Slip Cases £40.00+VAT

14) Tool kit

15) Instruction manual

16) Training DVD (2 Hours and 30 Minutes)

17) 12 Months warranty (back to base)


PLUS FREE ITEMS WORTH £40.00
1 x Roll of standard metallic gold foil
20 x Blank business card size cards for you to practice with
1 x Pair of heat protective gloves
 

Brass Type/Letters
This kit contains High Quality Brass Type in 10pt size.
Brass Type is deeper etched and this may help to prevent mistakes or misprints.

Please click here for details and refer to the second image which will show you the difference between metal type and brass type. Once on the above page, please explore other links to view our PDF Catalogue.
 

The Foilcraft Junior can also print Initials onto items such as
Phone Cases, Tablet Cases, Wallets, etc. 
(optional larger type and accessories may be required for printing initials). 

Please Note: This machine is sent by Courier Service only due to its weight - please do not change this option at checkout. Thank you.